Biological Nitrogen Removal Database

A manually curated data resource for microbial nitrogen removal


Anammox


Experimental setup


Influent:Low content artificial wastewate

Anammox system:nan

Anammox reactor:Up Flow - Anaerobic Sludge Blanket Reactor (UASB) reactor

Medium:Aerobic activated sludge

Culture taken from:Activated sludge obtained from the aeration tank of a wastewater treatment plant 

Microorganism cultured:Candidatus Brocadia and Candidatus Kuenenia

Respiration:Anaerobic

Electron donor:Ammonium chloride NH4Cl

Electron acceptor:Sodium Nitrite (NaNO2)

PH:nan

Maximum sludge concentration:nan

HRT:26.6 h

NH4–N Influent conc(mg/L):50

NO2–N Influent conc(mg/L):55

SO4–S Influent conc(mg/L):nan


Experimental Information


NH4–N Removal efficiency (%):nan

NO2–N Removal efficiency (%):nan

SO4-S Removal efficiency (%):nan

NLR kg-N/m3/d:nan

NRR kg-N/m3/d:470^


Information about Article


Major findings:Exploration of the microbial community dynamics in an ANAMMOX reactor from startup, increasing nitrogen load and stable performance for piggery wastewater treatment, which filled the gap among microbial community composition/anammox bacteria, running parameters and bioreactor performance.

Authors:Quang et al., 2018

Title:Microbial community dynamics in an ANAMMOX reactor for piggery wastewater treatment with startup, raising nitrogen load, and stable performance

Pubmed link:Link

Full research link:Link

Abstract:Bacterial community dynamics of the ANAMMOX reactor of an integrated "UASB + SHARON + ANAMMOX" system for treating piggery wastewater were investigated using the Illumina MiSeq method with samples obtained at ~ 2-week intervals during a 314-day period. With aerobic activated sludge as seeds and low content artificial wastewater (NH4+-N 50 mg/L; NO2--N 55 mg/L) as influent for the ANAMMOX reactor, nitrogen removal was initially observed on day 38 with a removal rate 1.3 mg N L-1 day-1, and increased to 90.4 mg N L-1 day-1 on day 55 with almost complete removal of ammonia and nitrite, indicating a successful startup of the reactor. Increasing influent load stepwise to NH4+-N 272.7 mg/L/NO2--N 300 mg/L, nitrogen removal rate increased gradually to 470 mg N L-1 day-1 on day 228, and maintained a stable level (~ 420 mg N L-1 day-1) following introduction of SHARON effluent since day 229. Correlation between microbial community dynamics and nitrogen removal capability was significant (r = 0.489, p < 0.001). Microbial community composition was determined by influent ammonia, influent nitrite, effluent nitrate and some undefined factors. Anammox bacteria, accounting for ~ 98.7% of Planctomycetes, became detectable (0.03% relative abundance) since day 38 and increased to 0.9% on day 58, well consistent with nitrogen removal performance of the reactor. Relative abundance of anammox bacteria gradually increased to 38.4% on day 140 with stepwise increased influent load; decreased to 0.4% on day 169 because of nitrite inhibition; increased to 19.24% on day 233 when the influent load was dropped; kept at ~ 9.0% with SHARON effluent used as influent and dropped to 3.3% finally. Anammox bacteria, only Candidatus Brocadia and Ca. Kuenenia detected, were the most abundant at genus level. Ca. Brocadia related taxa were enriched firstly under low load and detectable during the entire experimental period. Three main groups represented by Ca. Brocadia related OTUs were enriched or eliminated at different loads, but Ca. Kuenenia related taxa were enriched only under high load (NO2--N > 300 mg/L), suggesting their different niches and application for different loads. These findings improve the understanding of relationships among microbial community/functional taxa, running parameters and reactor performance, and will be useful in optimizing running parameters for rapid startup and high, stable efficiency.